Ensure you follow the instructions in Eos Integration to ensure Eos is configured ready for CueCam
The IP Address of your Eos Console (this can be found in Device > Network)
CueCam will also attempt to discover Eos devices (including ETCnomad) on your network, and show these below. Tapping any of these will auto-fill the IP Address and Port if possible.
Please note in a multi-console environment you can only connect to the Primary Eos device. You cannot connect to Secondary or Client devices.
From Eos version 3.3.9, you no longer need to specify a port.
Defaults to 3032. In most cases you should not need to change this.
If using Eos before 3.3.9, this needs to match the TCP Server Port you have set in System > Show Control, if you leave this blank on earlier versions you will still receive cue data but the remote control OSC Commands will not function.
You cannot use 3037 or 3038 here as these are reserved by Eos.
Some additional options are available here that choose the information displayed and captured in your CueCam recordings;
If set, CueCam will use the time from your EOS Console. To enable this you must enable Time Service in Device > Network
Use Console Time is not supported by ETCnomad
The Cue Lists in your current show file are shown here, select which you would like to display or All to select all available Cue Lists.
A maximum of six Cue Lists can be selected. If you select All Cue Lists and more than six Cue Lists are present, only the first six will be shown in CueCam.
If enabled, CueCam will include the current Eos command line on screen and in your recordings. You can specify the User to target here too. This is useful for tracking manual changes or for educational use.
If enabled, CueCam will display the current Scene from Cue List 1 above the current cue information. If no scene is available, the Eos Show File Name will be shown instead.
NB: At present only Cue List 1 is used for scenes.
If enabled, CueCam will display a running timer above the cue showing how long has elapsed since the last cue fired. The timer resets to 0:00 when a new cue fires.